40
to user’s own preferences. "LOADING DEFAULT" function allows trained operators or service-provider to refresh
all the parameters and settings to factory's default settings.
2. LOADING USER
Operators have option to save their own settings and parameters by using of "SAVING USER" sub-menu as
described below under 3. SAVING USER and loading those setting and parameter by following "2. LOADING
USER" sub-menu. Operator can use ()() key or corresponding numeric key to enter the sub-menu and
START/ENTER key to confirm the selection.
3. SAVING USER
Operators can save their own setting and parameters by following this sub-menu. To save operator’s own
settings, enter into “3. SAVING USER” followed by START/ENTER key to confirm selection. Operator to use
()() key or corresponding numeric key to enter the sub-menu.
4. PRINT NO. CLEAR
This function resets print sequence number to 001. Enter into and select “4. PRINT NO CLEAR” using ()() key
or corresponding numeric keys followed by START/ENTER key to confirm the selection.
To Next Page
Loading...
