Program key
Pressing MIDI/SELECT button and the Program key, then numeric keys then enter key, you
can select any patch number between 1 to 128. For example, if you want to change voice to
67 (Tenor Sax): Press MIDI/SELECT button and 67 on numeric keys, then enter key and
MIDI/SELECT button again to finish this action.
Assignment of the 8 Real-time Controller
In order to assign a Controller Knob to a MIDI Parameter (MIDI Controller) please follow
these steps:
1. press MIDI select then SET CONTROLLER key ( F3 )
2. choice number of knob on ten key group (1 - 8) then press enter
3. assign controller number on ten key group (1-127) then press enter
4. assign act channel number on ten key group (1-16) then press enter
5. Finally, Press MIDI / select key again to finish assign knob.
Now you have assigned to one Control knob the MIDI Parameter and the MIDI Channel.
Repeat the same method for the other 8 Real-time Controller Knobs.
To Next Page
Loading...