Installation & Setup
27
Precis LT Instruction Manual
Serial Control Device Startup
If you have not already done so, attach the serial control device to the Control port on the enclosure (see
page 17) and open the control program.
AMX Control Devices
Precis LT enclosures are compatible with a number of AMX control devices. For control programming
information, see the instruction manual for the specific interface.
APControl 3.0
If you are using APControl 3.0, install and open the program. Follow the directions in the setup wizard.
From the Launchbar menu, select Views / CrossBar and click on the crosspoints to execute switches.
APWeb
For startup information, see the APWeb Server Module documentation.
HyperTerminal
When power is applied to the enclosure, HyperTerminal displays a short splash screen with information
for your Precis LT model (FIG. 23). The system is ready to disconnect the factory default switch and to
execute a test switch (see page 28).
Note: AMX reserves the right to change the contents and/or formatting of the splash screen at any
time, without notice.
FIG. 23 Power-up splash screen in HyperTerminal
Precis 1 RU vX.Y.Z
FP vA.B.C
determine software version
Precis Version
Front Panel Version
To Next Page
Loading...
Need help?
General
