ESD Warning
1
Precis LT Instruction Manual
ESD Warning
To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly
grounded before touching any internal materials.
When working with any equipment manufactured with electronic devices, proper ESD grounding
procedures must be followed to ensure people, products, and tools are as free of static charges as
possible. Grounding straps, conductive smocks, and conductive work mats are specifically designed for
this purpose.
Anyone performing field maintenance on AMX AutoPatch equipment should use an appropriate ESD
field service kit complete with at least a dissipative work mat with a ground cord and a UL listed
adjustable wrist strap with another ground cord. These items should not be manufactured locally, since
they are generally composed of highly resistive conductive materials to safely drain static charges,
without increasing an electrocution risk in the event of an accident. ESD protective equipment can be
obtained from 3M™, Desco
®
, Richmond Technology
®
, Plastic Systems
®
, and other such vendors.
To Next Page
Loading...
Need help?
General
