Note: Different vehicles have different diagnostic menus.
Select Menu
System Scan
Manual Select
Special Functions
Select Function
3/3
Clal pphcations- Service Interv
Powertrain - Oil Service Count..
1/2
Operator Message
This Application Will Reset The
Oil Service Counter.
This Needs To Be Used When
A Vehicle Has Been Serviced.
0K ESC
Operator Message
Service Interval Reset
0K
10
Select Function
Electronic Parking Brake
Throttle/ldle Speed
Power train
Tire Pressure Monitorin S stem
Exhaust Emission
Steering
1/14
Service Interval Reset
utomattc o e
Other Automatic Types
1/2
Operator Message
Note!
During The Procedure. The
Engine Shall Be Off. And The
Supply Voltage Shall Be 12. 5V
(standard).lf The Voltage Is Less
Than The Standard, Then The
0K
Operator Message
Control Module Procedure
Completed Successfully.
0K
EN
To Next Page
Loading...
