To Next PageTo Next Page
Need help?Do you have a question about the Anchor Event Series and is the answer not in the manual?
Key safety instructions for tent installation, covering precautions and personal protective equipment.
Diagram illustrating tent dimensions and structure for a 10-meter wide tent.
Diagram illustrating tent dimensions and structure for a 12-meter wide tent.
Diagram illustrating tent dimensions and structure for a 15-meter wide tent.
Diagram illustrating tent dimensions and structure for an 18-meter wide tent.
Diagram illustrating tent dimensions and structure for a 20-meter wide tent.
Diagram illustrating tent dimensions and structure for a 25-meter wide tent.
Diagram illustrating tent dimensions for a 20m/15m combined width tent.
Diagram illustrating tent dimensions for a 25m/20m combined width tent.
Diagram illustrating tent dimensions for a 25m/15m combined width tent.
Configuration details for 10-meter tents with 4-meter uprights.
Configuration details for 12-meter tents with 4-meter uprights.
Configuration details for 15-meter tents with 4-meter uprights.
Configuration details for 18-meter tents with 4-meter uprights.
Configuration details for 20-meter tents with 4-meter uprights.
Configuration details for 25-meter tents with 4-meter uprights.
Diagrams showing cable bracing layouts for tents 15m wide or less.
Diagrams showing cable bracing layouts for tents 18m and 20m wide.
Diagrams showing cable bracing layouts for 20m/15m tents.
Diagrams showing cable bracing layouts for 25m/15m tents.
Diagrams showing cable bracing layouts for 25m/20m tents.
Diagrams showing cable bracing layouts for 25m-15m tents.
Lists necessary tools for tent assembly and disassembly, including special items.
Procedure for precisely laying out the tent footprint using string lines and geometric measurements.
Detailed instructions for correctly placing and securing all base plates according to layout.
Identifies and lists all components needed to pre-assemble the tent arches.
Step-by-step guide for connecting uprights to base plates and rafters to uprights.
Instructions for installing upright and roof cable bracing to stabilize the tent structure.
Details on preparing diagonal beam braces and push poles for lifting the first arches.
Procedure for safely lifting and positioning the initial end arch of the tent.
Instructions for lifting and positioning the second arch, connecting purlins.
Final steps to tension upright and roof cables and plumb the structure.
Guide for assembling and installing the framing for the gable ends of the tent.
Procedure for installing the main fabric panels onto the tent frame using ropes and channels.
Instructions for installing the fabric panels for the gable ends of the tent.
Guide for attaching optional fabric walls to the tent structure.
Guidelines for inspecting the tent system during its installation period.
Procedures for routine visual checks of tent components for wear or damage.
General