PAGE 2
Table of Contents
Section 1 - General Page
1.1 DESCRIPTION 3
1.2 SPECIFICATIONS 4
1.3 TYPICAL SYSTEM APPLICATION 4
Section 2 - Installation
2.1 PRESSURE SENSOR LOCATION 5
2.2 INSTRUMENT CASE 6
2.3 ELECTRICAL WIRING 7
2.3.1 Interconnection With Other HTST Components 7
2.3.2 Power Supply 8
2.3.3 Booster Pump Switch 8
2.3.4 Input Signal Connections 9
2.3.5 Transmitter Signal Connections 10
2.3.6 4-20 mA Output Wiring 11
Section 3 - Operation
3.1 PRINCIPLES OF OPERATION 11
3.2 ADJUSTMENT OF DIFFERENTIAL PRESSURE SET POINT 12
3.3 HIGH PRESSURE LIMIT SWITCH 13
3.3.1 Display of Limit Switch Set Point 13
3.3.2 Changing the Limit Switch Set Point 13
3.4 TEST BUTTONS 13
Section 4 - Test and Calibration
4.1 TEST PROCEDURES 14
4.2 CALIBRATION ADJUSTMENTS 15
4.3 CALIBRATION PROCEDURE 17
4.4 CALIBRATION OF 4-20mA OUTPUTS 17
Section 5 - TROUBLESHOOTING
5.1 TROUBLESHOOTING 18
Appendix A - J-Series Motherboard Schematic 21
Appendix B - Spare Parts List 22
Appendix C - Warranty and Return 23
To Next Page
Loading...