PAGE 6
2.2 INSTRUMENT CASE2.2 INSTRUMENT CASE
2.2 INSTRUMENT CASE2.2 INSTRUMENT CASE
2.2 INSTRUMENT CASE
2.2.1
Location
Select a location for the instrument which is accessible, clean and free from exces-
sive vibrations as well as from wide variations in temperature. The instrument should
be mounted vertically on a rigid support or in a panel. Local codes must be observed
where they apply.
2.2.2 Mounting
Wall mounting dimensions are shown below. For panel mounting instruments,
adjustable clamp-type mounting brackets are supplied. The brackets are reversible
for change to surface (wall) mounting.
FIGURE 4 MOUNTING DETAIL FOR J-200 SERIES CASEFIGURE 4 MOUNTING DETAIL FOR J-200 SERIES CASE
FIGURE 4 MOUNTING DETAIL FOR J-200 SERIES CASEFIGURE 4 MOUNTING DETAIL FOR J-200 SERIES CASE
FIGURE 4 MOUNTING DETAIL FOR J-200 SERIES CASE
To Next Page
Loading...