5
Getting Started
Setting up a Wireless Infrastructure Network
For a typical wireless setup at home (as shown above),
Please do the following:
1. You will need broadband Internet access (a ADSL, Cable
Modem line into your home or office).
2. Consult with your ADSL or Cable Modem provider for proper
installation of the modem.
3. Connect the ADSL or Cable modem to the Wireless Mini
Router.Plug in the Power Adapter to the Wireless Mini Router.
4. Adding computers to the Wireless Mini Router.
IMPORTANT NOTE
You can reset your router to default setting by press and hold the
‘RESET’ button inside the tiny hole for 8 ~10 seconds.
You can use this solution if you forget your password.
To Next Page
Loading...