To Next PageTo Next PageWhy andrews WHiC56 unit does not attempt to ignite?
If your Andrews Water Heater does not attempt to ignite, one possible cause is reversed plumbing or crossed pipes. Check to ensure that the plumbing is correctly installed. Also, inspect the inlet water filter.
What to do if my andrews WHiC56 Water Heater attempts to ignite but fails?
If your Andrews Water Heater attempts to ignite but fails, it might be due to air in the gas line. Try resetting the unit and trying again. If the issue persists, it's recommended to have a professional check the gas supply pressure.
General| Brand | andrews |
|---|---|
| Model | WHiC56 |
| Category | Water Heater |
| Language | English |
Explains safety icons, risk levels, and emergency actions for gas leaks.
Warnings on combustibles, clearance, children, and installation environment.
Steps for initial setup, opening valves, and checking system status.
Guide for normal operation and critical high-temperature safety warnings.
Diagnosing issues with ignition, no hot water, or incorrect temperatures.
Understanding failure codes and burner status indicators.
