To Next PageTo Next PageWhy Andrews Water Heater unit does not attempt to ignite?
If your Andrews Water Heater does not attempt to ignite, one possible cause is reversed plumbing or crossed pipes. Check to ensure that the plumbing is correctly installed. Also, inspect the inlet water filter.
What to do if my Andrews Water Heater attempts to ignite but fails?
If your Andrews Water Heater attempts to ignite but fails, it might be due to air in the gas line. Try resetting the unit and trying again. If the issue persists, it's recommended to have a professional check the gas supply pressure.
General| Brand | andrews |
|---|---|
| Model | WHi49 |
| Category | Water Heater |
| Language | English |
Explains symbols for Danger, Warning, Caution, and Remarks.
Details safety icons and immediate actions for gas leaks.
Actions for emergencies and precautions for placement and use.
Safety measures for electrical grounding, cords, and handling.
Explains how condensing technology works and preheats water.
Explains the danger of high temperatures and how to avoid scalding.
Step-by-step instructions for setting the desired hot water temperature.
Methods to prevent freezing damage to the unit and pipes.
Critical safety warning about filling the drain trap unit.
Solutions for issues during the initial setup and ignition.
Diagnosing and resolving problems with hot water temperature.
Addressing problems with hot water volume, flow rate, and alarms.
Interpreting burner indicator and error codes for fault diagnosis.
Detailed specifications including dimensions, capacity, and materials.
Key performance indicators like gas consumption and hot water capacity.
Specifications for external wall-hanging models.
Specifications for indoor wall-mounted models.
Details on performance, gas/electricity consumption, and temperature settings.
Detailed procedure for flushing the heat exchanger to remove debris.
