31
5.14
Fault Reference Code
Fault Code Fault Event Icon on
01 Fan is locked when inverter is off.
02 Over temperature
03 Battery voltage is too high
04 Battery voltage is too low
05
Output short circuited or over temperature is detected by
internal converter components.
06 Output voltage is too high.
07 Overload time out
08 Bus voltage is too high
09 Bus soft start failed
51 Over current or surge
52 Bus voltage is too low
53 Inverter soft start failed
55 Over DC voltage in AC output
57 Current sensor failed
58 Output voltage is too low
59 PV voltage is over limitation
5.15 Warning Indicator
Warning
Code
Warning Event Audible Alarm Icon flashing
01
Fan is locked when inverter
is on.
Beep three times every
second
03 Battery is over-charged Beep once every second
04 Low battery Beep once every second
07 Overload Beep once every 0.5 second
10 Output power derating Beep twice every 3 seconds
15 PV energy is low. Beep twice every 3 seconds
Battery equalization None
Battery is not connected None
Web: anern-marketing.com | Email: marketing@anern.com | Whatsapp: +86 13058030989
To Next Page
Loading...