Need help?Do you have a question about the Anest Iwata WS-400 EVO and is the answer not in the manual?
General| Type | Gravity Feed |
|---|---|
| Fluid Nozzle Size | 1.3 mm |
| Fluid Tip Orifice | 1.3 mm |
| Cup Capacity | 600 ml |
| Fluid Cup Capacity | 600 ml |
| Air Inlet | 1/4 inch |
| Material | Stainless Steel |
Declaration of conformity for the WS-400 Gravity Spray Gun.
Declaration of conformity for the LS-400 Gravity Spray Gun.
Details fire and explosion risks associated with solvents and flammability.
Guidance on personal protective equipment and health risks.
Lists prohibited actions and potential hazards from misuse.
Step-by-step guide for cleaning the spray gun after use.
Instructions for using an automatic spray gun washer.
Detailed steps for taking the spray gun apart for maintenance.
Common issues and solutions when the gun fails to spray.
Addressing inconsistent spray patterns and air leaks.
Diagnosing and fixing issues causing poor spray patterns.
Troubleshooting common causes of leaks from the spray gun.
Resolving problems related to air leakage from the air cap.
To Next Page