Need help?Do you have a question about the Anest Iwata W-200 HIGH T.E.C. Series and is the answer not in the manual?
General| Type | Gravity Feed |
|---|---|
| Air Pressure | 2.0 bar (29 psi) |
| Cup Capacity | 600 cc |
| Material | Aluminum |
| Inlet Thread Size | 1/4 inch |
| Recommended Air Pressure | 29 psi |
Detailed technical specifications for various W-200 series spray gun models, including nozzle size, air cap, pressure, and fluid output.
Prohibits sparks, open flames, and specifies grounding requirements for safe operation.
Emphasizes ventilation, protective gear, ear protection, and handling of leaks.
Warns against exceeding pressure limits, improper cleaning, pointing at people, and altering the gun.
Covers fluid hose connection, troubleshooting, spare parts, and cleaner pH.
Detailed steps for thoroughly cleaning the spray gun after each use, especially for bi-component paints.
Procedure for disassembling the fluid needle and related components.
Steps for disassembling the fluid nozzle and air cap set.
Instructions for disassembling and removing the fluid needle packing set.
Guidance on adjusting the fluid needle packing set for proper function.
Procedure to disassemble the air valve set and its spring.
Instructions for disassembling the air valve shaft.
Details on reassembling air valve components and fluid needle set.
Procedure for disassembling pattern and air adjustment sets.
Identifies causes like closed fluid knob or obstructed nozzle and provides remedies.
Lists causes such as air escapes or dirty air cap set and suggests cleaning or tightening.
Addresses issues like damaged parts, loose nozzles, or incorrect viscosity and offers solutions.
Covers causes like loose knobs, worn parts, or dirty packing, with corresponding remedies.
Explains causes related to air valve components or seat damage and suggests cleaning or replacement.
Guidelines for inspecting air cap set, fluid nozzle, and packings for wear or damage.
Specifies when to replace air caps, fluid nozzles, or fluid needle sets due to damage or leakage.
To Next Page