Anet ET5 X User Manual

Extruder present
temperature
Hot bed present
temperature
Hot bed intended
temperature
Print speed
Fan speed
Extruder intended
temperature
Temperature setup
Hot bed
/Extruder
Print speed
/Fan speed
Total print time
from the beginning
Cancel printing
Print / Pause
Speed setup
Load /
unload filament
Print completion
percentage
File name
Parameter interface
(only 9 parameters)
Auto leveling
Manual leveling
Offset value
Save
Control interface
Stop leveling
Auto Leveling Manual Leveling
CH Fila Pre-Heat
Stop loading /
unloading filament
Temperature
setup
Set the length of filament
to load or unload
Set the speed of loading
or unloading
Set temperature
value
Start/Stop
pre-heat
Hot bed
Extruder
Temperature
setup
Return
Upward
Confirm
print
Downward
15 characters maximum
Manual Print File
Motor
Position
value
Home
Disable
motor
Stop
The distance
of movement
Downward or
upward
V1.0
Print Setup
User Manual
Thank you for choosing Anet 3D printer.
Read this User Manual and watch our installation video carefully
and thoroughly before operating the printer for the first time.
Take good care of this User Manual.
Shenzhen Anet Technology Co., Ltd.
Add: Floor 1, 2 and B area of 3, the 4th Factory Building, Xiangli Ind. Park, No.1
Xiangli Road, North of Qinghu Road, Longhua Str., Longhua Dist., Shenzhen.
Tel: +86 755 2373 6621
Email: anet@anet3d.com
Anet ET5 X

Anet ET5 X Specifications

General

Brand	Anet
Model	ET5 X
Category	3D Printers
Language	English

Summary

Printer Setup and Configuration

Print Job Parameters

Configure print speed, temperature, file name, and completion percentage for print jobs.

Leveling Procedures

Guides for both auto and manual bed leveling, including offset value adjustments.

Pre-Heat and Filament Control

Set hot bed and extruder temperatures, and control filament loading/unloading speed.

Print File Operations

Manage print files, access manual controls, and initiate printing.

Printing Process Guide

First Print Preparation

Steps for initial setup, leveling, loading filament, and starting the first print.

Regular Printing Workflow

Procedure for standard printing, including setup, loading, and execution.

Filament Loading and Printing

Detailed steps for loading filament and initiating a print job.

In-Print Job Operations

Actions and adjustments possible during an active print job.

Important Notices and Safety

General Safety Precautions

Warnings regarding operation, touching hot parts, and electrical safety.

Printing Best Practices

Guidance on filament quality, moisture, leveling, and maintenance.

Technical and Operational Notes

Information on TF card usage, noise reduction, and software updates.