Anet A8 User Manual

A8 3D Printer Instructions
After sales support
Address: No. 341 Xiangli Ind Zone, Huaqing Road,
Qinghu Community, Longhua District, Shenzhen,
Guangdong, China
Telephone: +86 755 2373 6621
Email: anet@anet3d.com
Website: www.anet3d.com
Facebook: www.facebook.com/anet3dtech
YouTube: www.youtube.com/c/anet3dprinter

Anet A8 Specifications

General

Technology	FDM (Fused Deposition Modeling)
Build Volume	220 x 220 x 240 mm
Layer Resolution	0.1-0.3 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD Card, USB
Frame Material	Acrylic
Heated Bed	Yes
Bed Temperature	Up to 100°C
Supported Materials	PLA, ABS, Wood, HIPS
Power Supply	12V

Summary

A8 Assembly Instructions

Assembly Parts List

Lists all components required for the A8 3D printer assembly.

Printer Part Identification

Identifies and labels each individual part of the Anet A8 3D printer.

Assembly Steps

Detailed, step-by-step instructions for physically assembling the A8 3D printer.

A8 Quick User Guide

User Instructions and Safety

Essential guidelines and warnings for safe operation and handling of the Anet A8 printer.

Printer Specifications

Technical specifications detailing the dimensions, performance, and materials of the A8 printer.

Installation and Software Details

Information on machine installation procedures and software configuration for the A8 printer.

Quick Operation Guide

Guides users through initial printer setup, interface navigation, and basic operational procedures.