Anet A8 Plus User Manual

User Manual
If you have any problems with the product, you can obtain the relevant services through the
following channels :
Facebook after - sales group: www.facebook.com/groups/anet3dprintersupport
Anet official website: www.anet3d.com
After – sales service email: anet@anet3d.com

Anet A8 Plus Specifications

General

Build Volume	300 x 300 x 350 mm
Layer Resolution	0.1-0.4 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Display	LCD Screen
Print Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Bed Temperature	Up to 100°C
Nozzle Temperature	Up to 260°C
Print Speed	≤120mm/s (recommended 30-60mm/s)
Supported Filaments	PLA, ABS, TPU
Connectivity	USB
Extruder Type	Single
Power Supply	110V/220V AC, 360W
Frame Material	Aluminum

Summary

Use Instruction

Spare Parts List

A8 Plus Parts List 1

Detailed listing of printer components and quantities for assembly and maintenance.

Product Parameter

Name of Parts

Installation

Step 1: Initial Frame Assembly

Assembling the base frame structure of the 3D printer.

Step 10: Guiding Rod Assembly

Installation of guiding rods for the printer's linear axes.

Step 24: Wiring Connections

Connecting various cables and wires to the mainboard for functionality.

Step 28: Final Assembly Check

Reviewing the completed 3D printer assembly for proper configuration.

Machine Function Introduction

Operation Interface

Overview of the printer's control screen, buttons, and status indicators.

First Printing

Guide for initial setup, leveling, and loading filament for the first print.