Anet A8 Plus - Step 24: Wiring Connections

Step 24
The cable with the word "-A" is connected to one end of the
mainboard.
No.
Name
Qty.
1
Motor line bag
5
2
FPC grey ribbon line bag
1
3
Limit switch line bag
3
Fix mainboard on the groove
Please pass the lines(with -A word) of extruder, X
axis limit switch and X axis motor through the
square hole on the mainboard.
Pass all other wires through the holes
under the mainboard (The cable with the
word "-A" is connected to one end of the
mainboard.)