Anker Nebula Apollo - Device Settings and Configuration; Network and Bluetooth Configuration; Projector Image and Keystone Settings

EN EN
15 16
Settings
Go through the setup process when you power on Nebula Apollo for
the rst time.
1.
Network
This projector can be connected to the Internet via a wireless (Wi-Fi)
connection.
①
On the home menu, select [Network] and press .
②
Follow the on-screen instructions to complete the network
connection.
2.
Bluetooth
Bluetooth Speaker Mode
You can use this projector as a standalone Bluetooth speaker.
①
Press to switch to Bluetooth speaker mode.
②
Enable Bluetooth on your smartphone and select [Nebula-XXXXXX]
as the device to be connected.
Projector Mode
You can connect a Bluetooth speaker or pair of headphones to Nebula
Apollo while in projector mode.
①
Press to access the home menu, select [Settings] > [Bluetooth],
and press .
②
Follow the on-screen instructions to complete the Bluetooth
connection.
3.
Projector
Press to access the home menu, select [Settings] > [Projector], and
press .
[Image Mode] [Auto] / [Standard Mode] / [Battery Mode]
[Color Temperature]
[Normal] / [Cool] / [Warm]
[Auto Keystone Correction] Enable / disable auto keystone correction.
[Keystone Correction]
Manually adjust the keystone value. The
default value is 0.