To Next PageTo Next Page
Need help?Do you have a question about the Anker PowerHouse 757 and is the answer not in the manual?
General| Battery Capacity | 1229Wh |
|---|---|
| Battery Type | LiFePO4 |
| Car Charger Output | 120W |
| Weight | 43.9 lbs (19.9 kg) |
| Lifespan | 3000 cycles to 80% capacity |
| Warranty | 5 years |
| AC Output | 1500W |
| USB-C Output | 100W |
| USB-A Output | 12W |
| AC Charging Input | 1000W |
| Solar Charging Input | 300W |
| Recharge Time via Solar | 3.6 hours (300W solar panel) |
| Dimensions | 18.6 × 11.3 × 9.8 in (47.2 × 28.8 × 24.9 cm) |
| Recharge Time via AC | 1.5 hours |
Recharge your Power Station using a wall outlet with the AC charging cable.
Recharge using up to 3 Anker solar panels connected in parallel with a solar charging cable.
Recharge your Power Station by connecting to a car's output port with the car charging cable.
Connect devices to the AC output ports to charge them.
Connect devices to the USB ports for charging.
Turn on the car socket and connect devices to start charging.
Press the button to turn on ambient light and cycle through brightness levels.
Press and hold the button for 2 seconds to activate SOS mode.
Check overload protection switch if AC recharging is unavailable.
Press the reset button for a factory reset if the unit is not working correctly.
