J
Jennifer HerreraJul 28, 2025
How to fix Anker SOLIX F1200 Portable Generator AC recharging failure?
- EEbony JamesJul 28, 2025
To fix an AC recharging failure on your Anker Portable Generator, perform a reset, after which recharging can resume.
To Next PageTo Next PageHow to fix Anker SOLIX F1200 Portable Generator AC recharging failure?
To fix an AC recharging failure on your Anker Portable Generator, perform a reset, after which recharging can resume.
General| Battery Capacity | 1229Wh |
|---|---|
| Peak Output Power | 2400W |
| Battery Type | LiFePO4 |
| USB Ports | 4 |
| AC Charging Input | 1200W Max |
| Warranty | 5 Years |
| Cycle Life | 3000 cycles to 80% |
| AC Output | 120V, 60Hz |
| USB-A Output | 2 ports, 12W each |
| Car Socket Output | 12V, 10A |
| Solar Input | 11-30V / 10A |
| Car Charging Input | 12V / 10A |
| AC Charging Time | 1.5 hours |
| Operating Temperature | 32°F-104°F / 0°C-40°C |
Recharge via wall outlet using the AC charging cable.
Recharge using solar panels and the solar charging cable.
Recharge using the car charging cable and a vehicle's port.
Power devices by connecting them to AC output ports.
Connect devices to USB ports for power.
Connect devices to the car socket to charge.
Turn on and adjust the brightness of the ambient light feature.
Activate the SOS mode for emergency signaling.
Resolve issues related to AC recharging and charging failures.
Instructions on how to reset the power station to factory settings.
Essential safety guidelines for operating the power station safely.
Guidelines for proper storage and maintenance of the product.
