8. You can select the program you want by repeatedly pressing the Function button (B).
On the display (A) an arrow points to the chosen program and the duration of the
respective program is shown.
9. To start the program: Hold the motor unit (5) securely with one hand
and
press the Start
/ Stop button (C)
once.
10. When the program is finished, switch OFF the device. Press the Start/ Stop button (C)
once to do this. The operating light (7) and the
dis
play (A) will go
out.
11. Remove the supply cord plug from mains power outlet socket.
12. Wait until the blades have come to a complete stop, then twist the blade attachment
with the cup
counterclockwise
and remove from the electric motor.
13. Turn over the cup and unscrew the blade attachment from the cup in the
counterclockwise
direction.
14. Remove the blended items or store them in the small or large cup (10, 12)
and
seal
with the seal lid (9).
15. Clean the accessories immediately after each to prevent food contamination
(refer to "Cleaning” and “Storage" sections). Do not allow food residue to dry
on the
product after use.
Preparing Hot Food
CAUTION
:
o Danger of injury! Never reach into the blender/soup jug when it is fitted on the
motor unit.
o
Never
operate the soup jug without the
lid.
o Overheating of the device! Never use SOUP function with an
empty blender/
soup
jug
.
o Danger of burns! The surface of the soup jug can become hot
when using the
SOUP
function. Never touch it by hand, use suitable kitchen gloves when handling.
o Always empty the soup jug
after
use. It is not suitable for
storing
food.
IMPORTANT! The soup function is for heating only and does not cook raw food. Food must be
pre-cooked prior to using it in the soup jug.
With the SOUP program, the contents in the blender/soup jug (3) are pureed for 8 minutes.
The temperature that is reached after these 8 minutes depends on the starting temperature of
the ingredients. The recommendations are:
•
do not use any frozen food, precook such as potatoes and other hard ingredients.
•
use warm water and heat ingredients before blending
.
•
do not abort the Soup program prematurely. It is possible that the desired
temperature will then not yet have been reached.
To Next Page
Loading...
