anko 43115792 - Fat;Hydration;Muscle;Bone;Basal Metabolism Measuring Mode; Parameter Setting; Setting Personal Parameters

165cm/5'05.0"
25
1~12
100~250cm
3'03.5"~8'02.5"
10~100
FAT/HYDRATION/MUSCLE/BONE/
BASAL METABOLISM MEASURING MODE
(1) Setting personal parameters
Gender Height Age
male
Parameters can be set in the following range:
Memory Gender Height Age
male/female
At the first time when you install battery and switch on, all
default parameters are set as follow:
Memory
1
Parameter setting
Example: the 3rd user, female, 168cm, 28 years old, can set
her parameters as follow:
NOTE:
During parameter setting, if idle for 6 seconds, the parameters already set will be memorized
automatically and LCD shows “0”, meaning body fat measuring will be started.
If LCD prompt to show “0”during parameter setting, press SET(ON/SET) for 3 seconds to return
setting mode, then you can set user code,gender, height and age
Power off
to switch on
Press SET(ON/SET)
Default parameters
Press
to select user code
to confirm and
prompt to next
setting
Press SET(ON/SET)
Press
to select gender
to confirm and
prompt to next
setting
Press SET(ON/SET)
to set height
Press
to confirm and
prompt to next
setting
Press SET(ON/SET)
Press
to set age
LCD shows“0.0”
Power off
Auto off after several
seconds
Tap on the
scale platform