Do you have a question about the anko 43244010 and is the answer not in the manual?
Emphasizes reading the manual before use and following safety instructions to prevent damage.
Instructs to keep the manual for future reference and hand it over with the device.
Specifies using the device solely for its designated intended purpose.
States that the appliance is only intended for indoor use.
Advises keeping the appliance away from hot surfaces and naked flames.
Instructs to place the appliance on a level, stable, clean, and dry surface.
Recommends protecting the appliance from extreme conditions, dust, and moisture.
Warns against immersing the appliance in water or other liquids.
Prohibits opening the housing or inserting objects into it.
Recommends disconnecting and reconnecting the device for electrostatic discharge or power surge issues.
Instructs to unpack the device and check for undamaged parts before use.
Warns to keep all packaging materials away from children due to suffocation risk.
Advises removing all protective foils and packaging material prior to using the device.
Instructions to turn on the keyboard and press the connect button to initiate pairing.
Guide to turn on the external device, find 'KM43244010', and pair.
Explains that the device will search for and re-connect to the last paired device automatically.
Pressing the button cycles through steady on, ambient light, and off modes for RGB.
Allows fixing RGB to single colors with seven available options.
RGB light turns off in saving mode after 1 minute of inactivity.
FN+ key combination to adjust RGB brightness levels (30%, 60%, 100%, off).