anko FR-F15-2 User Manual (English)

Questions and Answers:

C
Cynthia WilliamsAug 3, 2025
Why does my anko Massager turn off automatically?
- M
  martinmichelleAug 3, 2025
  Your anko Massager may be turning off automatically because the product is designed to turn off after a set time. If the Timer Button shows a Blue Colour, it turns off after approximately 10 minutes. If it's Red, it turns off after approximately 15 minutes, and if it's Purple, it turns off after approximately 20 minutes. If the unit unexpectedly turns off regardless of auto off settings, it may have overheated due to excess use without a cool down period or the rotating massage fingers are jammed.
A
Andre HutchinsonAug 9, 2025
What to do if anko FR-F15-2 has no power?
- C
  Caitlin PaceAug 9, 2025
  If your anko Massager has no power, first, plug in the power adaptor and switch it on at the power point. If there's still no power, check the power point by testing it with another appliance, like a table lamp. If the power point has no power, you may need to call an electrician. Also, ensure that the small plug end of the power adapter is properly inserted into the appliance.
K
Keith WoodardAug 16, 2025
What to do if anko Massager has no massage?
- K
  Kristin CarrilloAug 16, 2025
  If your anko Massager is not providing any massage, first, ensure that the appliance is switched on by pressing the On/Off button. If this does not solve the issue, refer to the 'No Power' solutions.
L
loripowersAug 21, 2025
Why is pressure massage not working on anko FR-F15-2 Massager?
- R
  renee14Aug 22, 2025
  If the pressure massage is not working on your anko Massager, it could be due to the massage mode not being selected correctly. Make sure to select either Mode 1 or Mode 2, indicated by the Blue or Red indicator lights.
S
Scott MooreAug 28, 2025
Why is the heat function not working on my anko FR-F15-2?
- S
  Stephanie WalkerAug 28, 2025
  If the heat function is not working on your anko Massager, ensure that you have pressed the Heat button. When pressed, the button should illuminate with a blue light.