What to do if my anko FR-C21 has no power?
First, ensure the power adapter is plugged into both the power point and the appliance, and that the power point is switched on. To check the power point, test it with another appliance. If the power point works but the massager still has no power, there may be an issue with the power adapter or the appliance itself. If the power point has no power, call an electrician.
Why does my anko FR-C21 Massager appliance turn off during use?
The appliance is equipped with an auto-off function that activates after approximately 15 minutes of use. To resume use, allow the product to cool down for at least 30 minutes before turning it on again.
How to fix anko Massager if it has no massage functions?
First, ensure the appliance is switched on by pressing the On/Off button. If it is on, press one of the massage function buttons: Full, Upper, Lower, or Seat. If this does not resolve the issue, refer to the 'No Power' section for troubleshooting steps.
Why is the heat function not working on my anko FR-C21?
If the heat function is not working, make sure that you have pressed the “Heat” button to activate it.
To Next Page
General
