EasyManua.ls Logo

anko CF-2602 - User Manual

anko CF-2602
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Seat Massager
User Manual
Model No.: CF-2602
Rev 1
Note: The specifications and/or components of this appliance are subject to
change without prior notice.

Table of Contents

Questions and Answers

  • J
    jonathan38Aug 6, 2025
    What to do if my anko CF-2602 Massager has no power?
    • T
      Terry MeltonAug 6, 2025
      First, ensure the power supply is plugged into the power point and switched on. Check the power point with another appliance. If the power point is functional, insert the small plug end of the power supply into the appliance. If it still doesn't work, unplug the power supply and let the massager cool down for about 60 minutes before restarting. If there is still no power to the power point, call an electrician.
  • R
    russellsmithAug 12, 2025
    Why is there no massage or vibration on my anko Massager?
    • V
      vjeffersonAug 13, 2025
      If your anko Massager isn't vibrating, ensure the appliance is switched on by pressing the On/Off “PWR” button on the controller. Also, the controller might have timed out after 15, 30, or 60 minutes; press the On/Off “PWR” button again.
  • J
    Joseph ScottAug 18, 2025
    How to turn on the heat function on an anko CF-2602 Massager?
    • K
      Kristina Burton MDAug 18, 2025
      To activate the heat function, first, ensure the massager is on by pressing the On/Off “PWR” button. Then, press the Heat button. If the massager is off, the heat function won't work.
  • M
    Michael GonzalezAug 25, 2025
    What to do if my anko Massager turns off during use?
    • J
      jessica05Aug 26, 2025
      Your anko Massager has an auto-off function that activates after approximately 15, 30, or 60 minutes of use. Allow the product to cool for at least 60 minutes and then turn it on again.
  • K
    Kevin RobertsAug 30, 2025
    How to adjust vibration intensity on an anko CF-2602?
    • A
      Amy CraigAug 30, 2025
      If the vibration intensity is too low or high on your anko Massager, press the Intensity “INT” button to select the desired vibration level.

Summary

Warnings and Safeguards

General Safety Precautions

Key safety rules covering usage limits, avoiding water, proper disconnection, and handling to prevent hazards.

User and Environmental Guidelines

Guidelines on placement, use by sensitive individuals, pet safety, age restrictions, and intended use.

Health and Usage Advice

Recommendations for consulting doctors, avoiding certain conditions, and stopping use if discomfort occurs.

Product Components Overview

Key Parts Identification

Diagram and list identifying the Seat Massager, massage zones, heat zone, controller, and power supply.

Features and Operation

Product Features

Highlights include vibration motors, back heater, multiple modes, intensity levels, and auto-off timer.

Power Supply Setup

Instructions for connecting the power supply, fitting the massager to a chair, and plugging into the power point.

Massager Controller Functions

Controller Button Guide

Explanation of buttons: PWR (On/Off), Heat, Intensity (INT), and Mode Selector buttons.

Power and Heat Operation

How to turn the massager on/off and activate the heat function with default timer settings.

Intensity and Mode Selection

Details on adjusting massage intensity levels and cycling through 5 pre-programmed massage modes.

Manual Mode and Zone Indicators

Instructions for selecting specific massage zones manually and understanding zone indicator lights.

Auto-Off Timer Function

Information on the default 15-minute auto-off and how to change it to 30 or 60 minutes.

Maintenance and Troubleshooting

Cleaning Instructions

Precautions and methods for cleaning the massager, emphasizing spot cleaning and avoiding immersion.

Storage Guidelines

Advice on cleaning before storage and properly storing the power cord to prevent damage.

Troubleshooting Common Issues

Solutions for problems like no power, no massage, vibration issues, heat function failure, and auto shut-off.

Warranty Information

12 Month Warranty Details

Information on Kmart's warranty, terms, conditions, and contact details for claims and technical support.

anko CF-2602 Specifications

General IconGeneral
Brandanko
ModelCF-2602
CategoryMassager
LanguageEnglish

Related product manuals