Need help?Do you have a question about the anko MITYFLEX 907 Series and is the answer not in the manual?
General| Category | Water Pump |
|---|---|
| Power Source | Electric |
| Power | 400 W |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Cable Length | 10 m |
| Maximum Flow Rate | 9000 L/h |
| Model | MITYFLEX 907 Series |
Outlines the warranty terms and conditions for ANKO Mityflex pumps, covering defects in workmanship and material.
Important safety precautions and disclaimers regarding pump usage and chemical compatibility of tubing.
Instructions for handling warranty claims and directing repair requests to the appropriate distributor.
Details the key electrical, operational, and construction features of the 907 and 908 series pumps.
Provides instructions for power requirements, wiring, mounting, and location selection for pump installation.
Specific warning about avoiding outdoor or hazardous locations for pump installation.
Flow rates for Model 907 based on tubing ID, pump settings, and conditions.
Flow rates for Model 908 based on tubing ID, pump settings, and conditions.
Details the color-coded rollers and tubing ID compatibility for optimal pump performance.
Step-by-step procedure for safely replacing the fuse in the Model 907 pump.
Guidance on how the fan is attached to the rotor shaft for different pump models.
Detailed steps for installing tubing using Procedure A, including connecting power and feeding tube.
Detailed steps for installing tubing using Procedure B, involving an extra bracket.
Method for installing tubing by running the pump at high RPM without removing the cover.
Instructions for removing, disassembling, and reassembling the pump's roller bracket.
Lists component items with unit numbers for ordering, including roller brackets, pump kits, and fuses.
To Next Page
