CLEANING AND CARE
NOTE: To reduce build-up of milk residue, always empty any residual milk and clean
immediately after frothing is completed. Never leave liquid in the milk frother overnight.
1. Unplug the power base from the electrical outlet and let the milk frother cool down completely
before cleaning.
2. Clean the inside of the jug with a damp & soft cloth, or sponge. Only the whisk can be detached to
rinse with water.
3. If necessary, put on the whisk attachment to the whisk head. Fill clean water to MAX. level mark,
then add a couple drops of mild liquid soap. Turn the milk frother ON and allow the soapy water to
clean the jug. After the milk frother turns itself OFF, discard the soap water. Pour fresh clean water
into the jug and discard; repeat until soap residue is completely removed. Wipe out with damp cloth.
WARNING! Do not immerse the milk frother or the power base in water or any other liquid.
Never place the milk frother under running water to clean. Do not place in the dishwasher.
4. Make sure that all electrical connectors and sockets are kept dry.
5. Rinse lid and whisk in clean water and dry thoroughly.
6. Never use any solvents or abrasive cleaning agents, hard brushes, metal or sharp objects to clean.
Solvents are hazardous to health and harm the product’s plastic parts; abrasive cleaning agents and
cleaning accessories may scratch the product’s surfaces.
STORAGE
1. Unplug the milk frother and allow it to cool.
2. Store in its box in a cool and dry place.
3. Never store the appliance while it is still connected to mains power.
4. Never wrap cord tightly around the appliance.
5. Do not put any stress on the cord where it enters the appliance as it may cause the cord to fray and
break.
TECHNICAL DATA
Voltage : AC 220-240V 50Hz
Power : 450 - 550W
Capacity: MIN: approx.75ml
MAX : approx.130ml
MAX: approx.300ml
To Next Page
Loading...
