Rev 9/20/18 pg. 47
9.1.2 Press the Line Charge button. The following screen will be displayed.
9.1.3 Press the ALL button to charge all of the lines. Each button will change color as the associated line is being
charged. All lines are charged when all of the buttons return to their original green color.
9.1.4 Press the back button twice. The following “Select a Function” screen will be displayed again.
9.2 Press either the AOAC 985.29 TDF button or the AOAC 2001.03 TDF button depending on the method you're doing.
One of the following screens will be displayed.
Notice that the function you selected is now displayed in the top right corner of the screen and a back button
is displayed in the top left corner of the screen.
To Next Page
Loading...