Need help?Do you have a question about the Anser U2 SMART and is the answer not in the manual?
General| Technology | Thermal Inkjet |
|---|---|
| Print Speed | Up to 70 m/min (230 ft/min) at 300 dpi |
| Print Technology | Thermal Inkjet |
| Print Height | 12.7 mm |
| Ink Compatibility | Water-based |
| User Interface | Touchscreen |
| Connectivity | USB, Ethernet, Wi-Fi |
| Maximum Print Width | 12.7 mm |
| Memory | 4 GB |
| Supported Media Types | Porous, non-porous surfaces |
| Power Supply | AC 100-240V, 50-60Hz |
| Operating Temperature | 5-40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10 - 90% RH, non-condensing |
To Next Page
