Need help?Do you have a question about the Anser U2 PRO and is the answer not in the manual?
Printer specifications including display, interface, input device, language, LEDs, electrical requirements, dimensions, weight, mounting, temperature, and data interface.
Details on the printing engine, cartridge compatibility, print distance, print capability, and print height.
Highlights special features such as stand-alone operation, hot-swap, network management, setup wizard, and cartridge shutter.
Overview of the printer device, including its physical components and connectivity ports.
Detailed explanation of the functions and usage of the IR-remote keypad for controlling the printer.
General system settings including language, unit of measurement, password protection, font type, and global delay configuration.
Configuration of nozzle switch for dual channel printing and selection of left/right channels in single mode.
Setting the print direction from left to right or right to left using the ABC notation.
Adjusting the print resolution (DPI) for single and dual channel printing, ranging from 50 to 600 DPI.
Setting the appropriate trigger mode according to photocell specifications.
Adjusting the screen brightness level, with a range from 10% to 100%.
Setting the screen saving time, with a range from 1 to 60 minutes.
Performing a diagnostic test where the LCD displays red, green, blue, and white sequentially for 1 second.
Enabling or disabling the alarm for counters, remote keypad, and printing beep.
Configuring shift tables to divide the day into periods, matching current time to shift names for printing.
Setting up string numbers (1-5) and editing content for each string object.
Settings for pre-zeroing time, date, and counter values for messages.
Setting custom year values that will be used to replace the year in printed content.
Defining a specific time point for automatic date changes in printed output.
Step-by-step guide on creating new messages and adding various objects like text, time, and counters.
Configuration options for text objects, including font type, size (2.7mm to 12.7mm), and angle (0, 180).
Explanation of how the shift table uses current time to match and print proper shift names.
How to select logo objects for the logo list and import additional logos using Message Pro software.
Setting up string numbers (1-5) and editing content for each string object.
Initiates the printing process once the trigger signal is received.
A reference to the next section for detailed information on editing message objects.
Explains the three types of delays: repeat print, global, and message delay, and their priority.
Overview of functions for adding, modifying, moving, and deleting objects within a message.
Steps to set up object properties, leading to the move object page.
The page where objects can be selected for modification, moving, or deletion.
Adjusting the position of an object within a message using direction keys.
Selecting an object and pressing Enter to delete it.
Editing shift and string tables, also accessible from the message/object editor.
Querying to reset counters to their minimum value before each print.
Automatic accumulation of a value that represents the total number of messages printed.
Displays the printer's serial number, software version, and hardware version.
Displays the capacity of the ink cartridge.
Shows the ink's type and provides printing information.
Displays any system errors or alarms detected by the printer.
Information about Message Pro, a proprietary software for message editing and printer firmware upgrades.
Steps for editing messages on a USB drive using Message Pro and syncing them back to the printer.
Instructions on how to upgrade the printer's firmware using the Message Pro software via USB.
To Next Page
General
