5
INSTALLATION
1. Make sure all screws are tightened and use anti-shock mechanism is necessary.
Otherwise, any external damages such as box shocking isn’t covered by warranty.
2. Please load and unload cartridge in 15 degree angle.
3. The installation of an UPS is highly recommended because it helps to avoid the damage
that may be caused by power loss.
4. Power grounded is highly recommended. Furthermore, please avoid to share power
supply with any high power equipment.
5. If the working environment is dusty, it is highly recommended clean the nozzle regularly
using a low pressure compressed air supply that is dry and clean.
OPERATION
1. The remote controller will turned off automatically after three minutes if it is not being
operated.
2. Please keep the printing distance to a target object within 6mm to ensure the best
printing quality.
3. When the print head appears to have ink excessive, please apply the wet wipe to clean
the nozzle surface.
4. If the printing position is incorrect, please press the key [Tab|→] on the remote keypad
to adjust message print-delay to the best printing position.
5. In a dusty operation environment, please clear the dust using clean low pressure
compressed air daily.
6. Please contact your local distributor if the printer mal-functions and the problems cannot
be solved by yourself.
To Next Page
Loading...
