To Next PageTo Next Page
Need help?Do you have a question about the Anser U2 and is the answer not in the manual?
Instructions for safely installing the printer, including PrintHead protection and grounding.
Guidelines for operating the printer, including remote control behavior and print quality tips.
Explains the basic operation, navigation, and function keys of the IR remote keypad.
Steps to properly shut down the U2 inkjet printer system.
Restoring the printer to its factory default configuration.
Settings related to the PrintHead, including resolution and direction.
Configuring the photocell sensor for print timing and object detection.
Adjusting settings for conveyor speed and encoder integration.
Enabling audible alarms when a pre-set counter value is reached.
Setting up operator shifts and their starting times for record-keeping.
Performing self-tests, LCD tests, and LED tests for system health.
Configuring PrintHead channel, direction, and resolution for optimal printing.
Enabling pre-purge to prevent nozzle solidification and maintain print quality.
Selecting and configuring photocell types for print timing.
Calibrating the printer for different environments and ink types.
Choosing between internal or external photocells and their configurations.
Ensuring print length consistency with conveyor speed and encoder setup.
Enabling password protection to restrict access to printer functions.
Adding and formatting text content, including font selection and line breaks.
Setting up counting numbers, including single and box/lot counters.
Generating various types of barcodes for inclusion in messages.
General
