Anslut 013880 - Product Usage and Maintenance; Ice Pack Preparation and Usage; Operation and Settings Selection; Cleaning and Maintenance Procedures

EN
17
USE
1. Make sure that the ice packs are frozen.
2. Put the ice packs in the water container
together with water.
FIG. 8
3. Plug the plug on the ice cooler into a
power point.
4. Select the required setting with the
control panel or remote control.
MAINTENANCE
NOTE:
Switch o the product and pull out the plug
before cleaning.
• The lter panel and dust lter must be
cleaned at regular intervals to ensure an
adequate air ow.
• Clean the product with a cloth moistened
with water and a mild detergent.
Wipe with a cloth or sponge moistened
with water and dry with a dry cloth.
• Do not use abrasive detergent or petrol,
thinner or other solvents that can damage
the surface of the product.
• Make sure that no water or other liquid
enters the motor housing or other parts
of the product.
013880
Description Symbol Value Unit
Maximum fan ow rate F 4.26 m³/min
Fan power input P 49.90 W
Service value S
V
0.09 (m³/min) W
Standby power consumption P
SB
0.20 W
O power consumption P
OFF
- W
Sound power level L
WA
57.63 dB(A)
Maximum ow speed C 1.08 m/s
Annual power consumption kWh/a 18.11 kWh/a
Measurement standard for service value: IEN ISO 5801:2008
Contact details for obtaining more information: www.jula.com