Anslut 013946 - User Manual

Questions and Answers

G
Gina SandersAug 5, 2025
Why is my Anslut 013946 not cooling properly?
- C
  Caleb TuckerAug 6, 2025
  If your Anslut Air Conditioner isn't cooling properly, several factors could be at play. First, ensure the air filter isn't clogged by switching off the unit and cleaning the filter. Check that the outlet hose isn't blocked and is correctly connected. Also, the set point temperature might be too high, so try setting it lower. Make sure all doors and windows are closed to prevent heat from entering. The room size could be exceeding the unit's capacity; verify the room's area. Finally, eliminate any heat sources in the room. If none of these steps work, the refrigerant level might be low, requiring a service technician to check and replenish it.
H
higginsheatherAug 11, 2025
How to reduce noise and vibration from my Anslut Air Conditioner?
- K
  Kathleen VazquezAug 11, 2025
  Noise and vibration in your Anslut Air Conditioner can be caused by two main issues. First, check if the surface is not horizontal. If so, place the air conditioner on a level, stable surface. Second, a clogged air filter can also cause these issues. Switch off the air conditioner and clean the filter according to the instructions.
R
Robert CalderonAug 18, 2025
Why does my Anslut Air Conditioner make a gurgling sound?
- C
  Christopher AveryAug 18, 2025
  A gurgling sound in your Anslut Air Conditioner is usually normal. It's caused by the flow of refrigerant within the unit.
K
Keith GuzmanAug 23, 2025
What to do if my Anslut 013946 does not start?
- T
  Teresa StevensonAug 23, 2025
  If your Anslut Air Conditioner does not start, there might be several reasons. If the error code P1 is displayed, it indicates that the tank is full. To resolve this, switch off the air conditioner, empty the tank, and then restart it. In COOL mode, the unit might not start if the room temperature is lower than the set point temperature; in this case, you should change the set point temperature. If you see an E0 EEPROM error, contact the manufacturer or an authorised service centre.
J
Johnathan PetersonAug 30, 2025
How to reduce noise and vibration from Anslut 013946?
- M
  mitchellamandaAug 30, 2025
  If your Anslut Air Conditioner is making excessive noise and vibration, make sure it is placed on a level, stable surface. If the surface is not horizontal, adjust the positioning of the unit. Also, a clogged air filter can cause noise and vibration. To resolve this, switch off the air conditioner and clean the filter according to the instructions.