Anslut 013947 User Manual (English)

Questions and Answers:

M
Matthew ThomasAug 6, 2025
Why Anslut 013947 Air Conditioner does not cool properly?
- T
  Tanya WilsonAug 7, 2025
  There could be several reasons why your Anslut Air Conditioner isn't cooling as expected. It might be due to a clogged air filter, which requires you to switch off the unit and clean the filter. The outlet hose could be blocked or incorrectly connected, so check and reconnect it. The set point temperature might be too high, so try setting a lower temperature. Ensure all doors and windows are closed. The room might be too large for the unit, so verify the room size. Also, remove any heat sources from the room if possible. Finally, the refrigerant level might be low, requiring a service technician to check and replenish it if necessary.
C
clarklarryAug 13, 2025
What to do if my Anslut Air Conditioner does not start?
- K
  Keith RoweAug 14, 2025
  If your Anslut Air Conditioner doesn't start, it could be due to error code P1, indicating that the tank is full. To resolve this, switch off the air conditioner, empty the tank, and then start it again. Alternatively, if you're in COOL mode, the room temperature might be lower than the set point temperature. In this case, try adjusting the set point temperature.
A
Angela MooreAug 20, 2025
How to reduce noise and vibration from Anslut 013947 Air Conditioner?
- N
  Nicole WoodAug 21, 2025
  To reduce noise and vibration from your Anslut Air Conditioner, ensure that the unit is placed on a level, stable surface. Additionally, a clogged air filter can cause these issues, so switch off the air conditioner and clean the filter according to the instructions.