Anslut 013947 - STORAGE

EN
86
electronic components to stop working.
STORAGE
When the air conditioner is not in use:
1. Empty the tank according to the
instructions.
2. Allow the air conditioner to run in FAN
mode for 12 hours in a warm room to
dry the inside and to reduce the risk of
mildew.
3. Switch o the air conditioner and pull out
the plug.
4. Clean the air lter according to the
instructions, allow to dry and replace.
5. Remove the batteries from the remote
control.
NOTE:
Store in a dry and cool place. Do not expose
the air conditioner to heat or direct sunlight,
this can reduce the service-life.
TEMPERATURE SETTINGS
Mode Temperature range
COOL (cooling mode) 17–35°C (62–95°F)
DRY
(dehumidication)
13–35°C (55–95°F)
INSTALLATION OF OUTLET HOSE
• The outlet hose and adapter should be
tted, if necessary for the mode in use.
• The outlet hose must be tted for COOL
and AUTO mode.
• The outlet hose is not tted for FAN and
DRY mode.