To Next PageTo Next PageWhy won't my Anslut 014756 start?
Your Anslut Humidifier might not start due to several reasons: * The plug may not be properly plugged in, so ensure it's connected. * The reservoir might be empty; if so, fill it with water. * The container/reservoir might not be correctly fitted. Make sure it is properly in place.
How to fix bad smell from Anslut Humidifier steam?
If the steam from your Anslut Humidifier smells bad, it's likely because the water is dirty or the humidifier hasn't been used for a while. Clean the container and pan, then refill with fresh water to resolve this.
What to do if my Anslut Humidifier is making abnormal noises?
If your Anslut Humidifier is making abnormal noises, it might be tilted or on an unstable surface. Place the humidifier on a level, stable surface to stop the noise.
Why is my Anslut 014756 not producing enough humidity?
If your Anslut Humidifier isn't providing enough humidity, the steam outlet could be blocked. Set the humidifier to the maximum steam output to resolve this.
What to do if the Anslut Humidifier shows a lack of water warning despite having water?
If your Anslut Humidifier shows a lack of water warning even when there's water in the container, it could be that the water isn't reaching normal run mode. Try waiting 1 minute before starting the humidifier to allow the water to settle.
Why does the lack of water warning stay on for a long time on my Anslut 014756 Humidifier?
If the lack of water warning stays on for a long time and the Anslut Humidifier doesn't start, it's possible the humidifier was tilted. This can cause the safety function to switch off the humidifier due to a registered low water level in the pan. Place the humidifier on a level, stable surface, ensuring it is not tilted.
General| Brand | Anslut |
|---|---|
| Model | 014756 |
| Category | Humidifier |
| Language | English |
First-time filling method, involves removing top cover and container.
Filling via the nozzle, ensuring no water enters steam outlet.
Filling by removing top cover, ensuring no water enters steam outlet.
Procedure for cleaning the base and container weekly.
