Anslut 014756 - Alternative two; Alternative three; FITTING THE CONTAINER; DIRECTION OF STEAM OUTLET

EN
28
3. Fill the container from the tap.
FIG. 2
Alternative two
Fill the container through the nozzle. Make sure
that water does not get into the steam outlet.
FIG. 3
Alternative three
Remove the top cover and ll the container.
Make sure that water does not get into the
steam outlet.
FIG. 4
FITTING THE CONTAINER
The container should be tted with the side
with the logotype facing the same way as the
control panel on the bottom casing.
FIG. 5
DIRECTION OF STEAM OUTLET
The steam outlet can be turned 360° to point
the steam in the required direction.
FIG. 6
MAINTENANCE
NOTE:
Switch o the humidier and pull out the
plug before cleaning.
CLEANING
• Clean the base and container every week
and remove any scale.
FIG. 7
• Wipe the surface of the container with a
soft, damp cloth.
• Clean the container with distilled water
and a mild detergent.
FIG. 8