Anslut 014956 - Page 44

EN
44
• Do not overload the power
point or connection. Risk of
electric shock and/or re as
a result of overheating.
• Do not start/stop the
product by disconnecting/
reconnecting the power
supply. Risk of electric shock
and/or re as a result of
overheating.
• Do not use a damaged or
unsuitable power cord. Risk
of re and/or electric shock.
• Never modify the power
cord or plug. Connect the
product to a separate
electric circuit. Risk of
electric shock and/or re as
a result of overheating.
• Do not touch the power
cord or the plug with wet
hands. Risk of electric
shock.
• Do not place the product
near sources of heat. Plastic
parts can melt. Fire hazard.
• Switch o the product
immediately and pull out
the plug in the event of any
abnormal noise, smell,
• The product should be
stored in such a way as to
prevent mechanical
damage.
• A warning that the product
must be stored in a well-
ventilated area of at least
the same size as the room
in which the product is
intended to be used must
be available.
• Refrigerant circuits must
only be opened and worked
on by an authorised
refrigeration technician.
• Service must only be carried
out in accordance with the
recommendations on the
manufacturer. Maintenance
and/or repairs that require
other qualied personnel
must be carried out under
the supervision of a person
competent to handle
ammable refrigerant.
• The product uses ammable
refrigerant. Leakage of
refrigerant is a re risk on
contact with an external
source of heat.