To Next PageTo Next Page
Need help?Do you have a question about the Antar AT51112 and is the answer not in the manual?
General| Type | Wheelchair |
|---|---|
| Foldable | Yes |
| Color | Black |
| Weight Capacity | 120 kg |
| Seat Width | 46 cm |
| Seat Depth | 40 cm |
| Overall Width | 64 cm |
| Frame Material | Aluminum |
| Armrest Height | 21-24 cm (8-9 inches), adjustable |
Adheres to maximum user weight and prohibits use on stairs or escalators.
Specifies rules for using the seat, including backrest and surface conditions.
Rollator is for walking support only; use specified parts and secure items in bag.
Ensure rollator is unfolded, brakes checked, and parts are in good condition.
Avoid walking backward, be cautious on obstacles, and do not adjust while using.
Be mindful of heavy items in the bag and ensure all wheels contact the ground.
Inspect parts for damage or missing items before assembly; check cables are untangled.
Lists rollator parts: frame, backrest, wheels, cane holder, and manual.
Secure wheels with clips and insert handles, then tighten knobs for stability.
Adjust seat height using frame mechanisms and ensure latches click securely.
Align handle holes and frame, insert handles, and tighten knobs for proper wrist height.
Place backrest correctly and verify brake function; check for 3-4mm gap when released.
Perform folding by reversing the assembly steps for storage or transport.
Ensure parking brake is blocked, backrest is correct, and surface is level.
Pull levers to ensure rollator doesn't move; push down to block parking brake.
Push levers down for parking brake; an audible click confirms engagement.
If wheels move with brakes applied, stop use and seek adjustment or maintenance.
Wipe with a damp cloth, dry thoroughly, and avoid harsh cleaners or dirt buildup.
Periodically inspect parts for wear and ensure all bolted connections are secure.
Verify brakes stop the rollator and parking brake engages securely.
Loosen locknut, turn adjuster counter-clockwise to increase pressure, then retighten.
Ensure a 3-4 mm gap between brake lining and wheel; elements should not touch.
Details total width, handle distance, seat height, weight, and other specifications.
For individuals with diseases/injuries needing rehabilitation or compensation support.
Store the product in a dry, cool room away from moisture and direct sunlight.
The medical device can be safely disposed of as ordinary municipal waste.
