1
© 2023Antari Lighting and Effects Ltd. www.antari.com
User Manual
1. Introduction
Please read this user manual carefully before operating the machine.
Please put this manual in a place where you can refer to it at any time.
If you encountered any problems, please contact your local Antari dealer for advice and assistance.
2. Safety Information
CAUTION!
Please read the following safety information carefully before operating the machine.
This information includes important safeguards about installation, usage and
maintenance. Pay attention to all warning labels and instructions in this manual and
printed on the machine.
Always connect the machine to correct voltage. It will lead to electrical shock or
burned and may cause serious consequences if connecting to incorrect or improper
WAR N IN G!
Risk of electrocution
Always connect the machine to a protected circuit and ensure it is properly grounded
to avoid risk of electrocution.
※ Damage caused by the disregard of this user manual are not subject to warranty. Antari and its
dealer will not accept liability for any resulting defects or problems.
2.1 Installation
l Keep this device dry. This machine is not waterproof. Do not expose the machine to water splashes.
l Place the machine on a flat surface. Installed in a well ventilated area. Provide at least 50 cm space
To Next Page
Loading...
