why AntheM rooM correction i s
the best rooM correction systeM
on the MArKet
Even when the finest speakers are perfectly positioned, the room can have a dramatic
negative impact on sound quality. Room dimensions, dead spots, archways, even
furniture, can turn a room into an additional instrument adding unwanted coloration
and resonances to sound.
ARC 1M, featuring the award-winning Anthem Room Correction (ARC) system, was
designed exclusively for MRX receivers. In minutes, ARC 1M adjusts for the room’s
effect on the speakers in a way that mimics our hearing. This way your Anthem gear
and Paradigm speakers can do what they do best — allow you to lose yourself in the
music or movie.
ARC 1M ...
• Connects quickly via ethernet.
• Offers a high level of digital signal processing that allows for incredibly precise
correction curves.
• The option to print ‘before and after’ room-measurement graphs … ARC’s
improvements will be obvious in the ‘after‘ graphs!
• Fully automated or a manual ARC setup? It’s up to you!
• Includes calibrated microphone and stand.
How does ARC 1M do what it does?
ARC 1M analyzes each speaker’s in-room response then sets output levels, crossover
frequencies and correction parameters for each.
ARC 1M applies correction for up to 7 channels plus the subwoofer.
Unlike other room correction systems, ARC allows for multiple microphone
measurements. Multiple measurements allow for peaks and nulls to be identified
providing far more accurate room correction.
ARCuracy! Your connected PC’s 64-bit floating point processor calculates the
correction curves to the n’th degree of accuracy.
Separate configurations are available for music, movies, or any other application
where more than one configuration is useful.
ARC 1M applies correction to peaks and dips in room response – a far more natural
and accurate approach.
Multiple Channels of Clean High Power – 7 channels in MRX 710 and MRX 510; 5 channels in
MRX 310 (see Technical Specs for power output numbers.)
General
• Video Conversion from Composite Video
and Component Video to HDMI
• 7 Rear HDMI inputs and a front-panel
input on MRX 710 and MRX 510 with
cover door.
• HDMI Audio Return Channel
• Dual HDMI outputs
• Fast HDMI switching
• 1080p24 mode
• 4K Upscaling and Pass-Through
• Dolby Volume
• AM/FM Tuner
• Software Updates via the USB port
• Dual speaker configuration
• Speaker crossover adjustable in 10-Hz
increments
• Bi-amp the front L/R speakers with
MRX 710 and MRX 510
• Easy-to-read on-screen menus
• High-quality status displays
• 3D support
Decoding
• Dolby TrueHD and Dolby Digital Plus
• DTS-HD Master Audio and
High-Resolution Audio
Listening Modes
Anthem’s dual processor DSP circuit delivers a
full suite of modes:
• AnthemLogic – Cinema, Music
• Dolby Pro Logic IIx – Movie, Music (including
Center Width, Dimension and Panorama
adjustments)
• DTS Neo: 6 – Cinema, Music
• All-Channels – All-Speaker Stereo
Inputs
• Up to 20 input configurations
• Analog Video Inputs: 1 Composite +
2 Component
• Digital Audio Inputs: 2 Coaxial + 3 Optical
• 5 Stereo Analog RCA Inputs
• Optical, coaxial and analog inputs send
2-channel music to a second audio zone.
Custom Installation
• IP Control: Command set is comprehensive yet
easy to work with. Drivers for popular control
systems and remote control apps for iOS
(Apple) and Android. Similar commands
and feedback can also be used through
serial control.
• IR Input and Emitter Output
• Trigger Output
• Second Audio Zone
• RS-232 Control
Additional Features
• Backlit Remote Control
• Power consumption in standby: <0.3 W
• Sidemount Rack Kit (sold separately)
• Includes 1 remote
Warranty
• 3 years
To Next Page
Loading...
