Anthem MRX Series - User Manual

STEP 1
Repeat step for other bracket.
STEP 2
MRX SERIES / AVM 60 RACK MOUNT KIT
ASSEMBLY INSTRUCTIONS FOR RACK-MOUNTING
ANTHEM DOES NOT SUPPLY THE SCREWS FOR
ATTACHING THE RACK MOUNT TO THE RACK
CABINET. USE HARDWARE SPECIFIED OR PROVIDED
BY THE RACK UNIT MANUFACTURER.
RACK MOUNT KIT: 1.25 lb / 0.57 kg
ALL SCREWS MUST BE USED IN ORDER TO FULLY SUPPORT THE WEIGHT OF YOUR NEW MRX / AVM 60.
PARTS INCLUDED:
• 2 Rack Mounting Brackets (L&R)
• 1 Crosspiece
• 11 Screws
NOT INCLUDED:
• Rack Mount Cabinet
IMPORTANT: BRACKETS MUST BE ATTACHED TO MRX / AVM 60 BEFORE SLIDING UNIT INTO THE RACK MOUNT CABINET.
MAN0121 | 122115
Crosspiece should be attached before
the MRX / AVM 60 is installed in rack.

Summary

MRX Series AVM 60 Rack Mount Kit Assembly Instructions

Step 1: Attach Rack Mounting Brackets

Attach the left and right rack mounting brackets to the MRX / AVM 60 unit using screws.

Step 2: Install Crosspiece and Complete Mounting

Attach the crosspiece to the unit before rack installation and repeat bracket steps.

Anthem MRX Series Specifications

General

Brand	Anthem
Model	MRX Series
Category	Racks & Stands
Language	English