Anton Sprint eVo - Pressure, Differential Pressure, Working Pressure and Operating Pressure tests (eVo 2 and eVo³ only)

10
Performing tests Sprint eVo
1
/eVo
2
/eVo
3
You may repeat the test by pressing the key
û
(you can print the
results).
Tightness Test
1. Press the soft key
u
to start test. Sprint displays the duration time on
the screen.
2. To stop test press the soft key

.
3. Press the soft key
ü
to pass test.
You may fail the test by pressing the key
û
to indicate test has failed.
At the end of the tightness test you can log or print the results. Press the ESC
key to return to Press Menu.
Press ESC again to return to Test Menu.
3. Pressure, Differential Pressure, Working Pressure and
Operating Pressure tests (eVo
2
and eVo
3
only)
Before carrying out the test the pressure must be zeroed with the tubes con-
nected to the instrument but not the pressure source. A thermocouple may be
connected to provide temperature readings in these tests.
Screen 1 Screen 2 Screen 3 Screen 4
14:44:27
08-Feb-2006
Stabilisation
Finish P4
mBar
Diff press
0.0
P=0
Start P3
mBar
0.0
Duration
00:00
mBar
0.0
14:44:27
08-Feb-2006
Stabilisation
Finish P4
mBar
Diff press
0.0
StartP3
mBar
0.0
Duration
00:25
mBar
0.0
14:44:27
08-Feb-2006
Stabilisation
Finish P4
mBar
Diff press
0.0
StartP3
mBar
0.0
Duration
00:54
mBar
0.0
Stabilised?
Screen 1 Screen 2 Screen 3