Need help?Do you have a question about the Anton Sprint Pro and is the answer not in the manual?
General| Brand | Anton |
|---|---|
| Model | Sprint Pro |
| Category | Measuring Instruments |
| Language | English |
Instructions for unpacking the Sprint Pro and its accessories from the packaging.
Details the main components and connections of the Sprint Pro analyser.
Explains the operation of soft keys, ESC, and ON/OFF/ENTER buttons.
Guides on connecting probes for different test types like flue gas and differential temperature.
Procedure for powering on the Sprint Pro and navigating its main menu.
Steps to properly power down the Sprint Pro analyser.
Instructions for charging the battery and understanding power indicators.
Details the function of the internal pump during purging and tests.
Description of the colour LCD display, soft keys, and menu structure.
Illustrates the hierarchical structure of the Sprint Pro menus.
How to select and set the fuel type for analysis.
Configuring units for pressure, temperature, and efficiency.
Adjusting display, auto-off, backlight, and key click settings.
Selecting methods for exporting logs and reports to printers or mobile devices.
Setting date/time, editing report headers, and managing passwords.
Steps for zeroing the CO2 sensor in clean air or with a scrubber.
Key steps before performing tests, including probe connection and zeroing.
Guide to conducting flue gas analysis and viewing results on the device.
Procedures for performing pressure-related tests on the Sprint Pro.
Performing differential, working, and operating pressure/temperature tests.
Guides for conducting room safety and appliance sweep tests.
Procedures for gas escape detection and ambient air monitoring.
Procedure for logging test results and managing stored logs.
How to access, view, and remove logged test data.
Steps to print logs and reports using an IR printer.
Transferring data to a mobile app via Bluetooth or Wi-Fi.
Guidelines for cleaning the Sprint Pro display and buttons.
Information on annual calibration and overdue warnings.
Procedure for drying water trap and filters after use.
Instructions for cleaning or replacing dust and water filters.
Details on operating temperature, battery, standards, and fuel options.
Details on the flue probe's insertion length and construction.
Specifications for gas measurements including range, resolution, and accuracy.
Specifications for CO/CO2 measurements in room safety and ambient monitoring.
Details on pressure and temperature measurement ranges and units.
Details on charger requirements and device interfaces.
List of available flue probes and associated accessories.
List of gas escape probes and associated accessories.
Solutions for common issues like power, blockages, printer errors, and zeroing failures.
Understanding and responding to CO alarms and sensor-related problems.
Addressing unstable readings, sensor errors, and date/calibration problems.
Introduction to BS 7967 CO testing and pass/fail specifications.
Explanation of result codes and on-screen prompts for safety tests.
Criteria for a passing room safety test, including normal and low CO levels.
Analysis of failure codes like FAILED (1), (2), (3), (4) in safety tests.
Interpreting multiple peaks or unstable CO readings during safety tests.
Understanding failures related to CO levels exceeding limits near test end.
Details the 5-year warranty and its exclusions for the Sprint Pro.
Circumstances that can invalidate the Sprint Pro warranty.
Estimated lifespan for the battery and various sensors.
To Next Page