24
Maintenance and Calibration Sprint Pro
VI. Maintenance and Calibration
General
To keep the display panel and operator buttons free from dirt build-up, regularly
wipe over your Sprint Pro with a slightly damp cloth.
4.1 Unit
Sprint Pro should be calibrated once a year and will warn you when the calibra-
tion due date is drawing near. If the calibration due date has passed, Sprint
Pro will display a message 'Calibration overdue'.
4.2 Filter and Water Trap
The combined filter and water trap is used in-line between the flue probe and
the Sprint Pro main unit. It is best practice to not let any water build up inside
the filter bowl, the water trap must be dried after use. A quick visual inspection
before any test is advised.
1 Bottom moulding
2 Nut moulding
3 Water filter
4 O-ring
5 Dust filter
6 Middle moulding
7 Top moulding
8 Water trap label
To Next Page
Loading...