2
Unpacking Sprint Pro
Sprint Pro
Multi-function Flue Gas Analyser
Thank you for purchasing the Sprint Pro Multi-function Flue Gas Analyser.
Sprint Pro will give you years of unparalleled service and reliability if looked
after correctly.
There are six versions covered in this manual as follows:
Sprint Pro 1 Standard model flue gas analyser with CO and O
2
sensor
Sprint Pro 2 As Pro 1 with pressure and gas escape probe (GEP) capability
(available as an option) and upgradability for CO
2
and NO
measurements
Sprint Pro 3 As Pro 2 with a GEP probe included and mobile application
connectivity
Sprint Pro 4 As Pro 3 with a CO
2
room measurement sensor
Sprint Pro 5 As Pro 3 with a NO measurement sensor
Sprint Pro 6 As Pro 3 with a NO and CO
2
measurement sensors
Please read the instructions carefully before use. Keep the manual for future
reference.
Unpacking
Important: Please fully charger Sprint Pro before use.
Remove the Sprint Pro from the packaging. The Sprint Pro accessories will be
located in the carry case. Check the contents are complete, you should have:
• Sprint Pro analyser
• USB charger and USB lead
• Flue probe assembly, including water trap and filters.
To Next Page
Loading...
Need help?
General
