9
Sprint Pro Set Up & Menu Configuration Options
exceed 100%. Sprint Pro provides a condensing efficiency calculation via the
efficiency option NetHE. The result of this calculation takes into account the
recovered latent heat.
Analyser settings
The Analyser settings menu allows you to alter the settings for the display,
auto off timeout, back light, key pad and Supervisor settings. To change any of
these settings from the Main Menu select Analyser Settings. Use the soft keys
and to navigate the available submenus select the required option using
the soft key.
Auto off timeout
The Auto off timeout screen allows the number of minutes at which the Sprint
Pro will automatically switch off to be selected. Use the soft keys – and + to
reduce or increase the number of minutes. Press the key to accept the change
or ESC to cancel. To disable Auto off timeout press – key until 'disabled' is dis-
played.
Backlight
Use the soft keys and to select one of the following options: Dim, Mid
or Bright.
Key click
The Key click settings allows the audible 'clicks' when the keypad is pressed to
be enabled or disabled.
Use the soft keys to select Enabled or Disabled from options. Press the
key to
accept the change or ESC to cancel.
Report
The report option allows the selection of the means by which the logs and test
reports will be exported.
Use the soft keys
and to select between the following options and the
key to accept
IR Printer: Logs and test reports will be exported to IR printer (Sprinter).
Mobile App: Logs and test reports will be exported to mobile app.
Select by key hold: Allows soft key to be held which will toggle between IR
printer and Mobile App.
To Next Page
Loading...
Need help?
General
